+3.3V/+5V, 8-Channel Relay Drivers with Fast
Recovery Time and Power-Save Mode
MAX4822/MAX4823 Pin Description
PIN
MAX4822
MAX4823
NAME
FUNCTION
Reset Input. Drive RESET low to clear all latches and registers (all outputs are high
1
1
RESET
impedance). RESET overrides all other inputs. If RESET and SET are pulled low at the
same time, then RESET takes precedence.
Chip-Select Input. Drive CS low to select the device. When CS is low, data at DIN is
2
2
CS
clocked into the shift register on SCLK’s rising edge. Drive CS from low to high to latch
the data to the registers and activate the relay outputs.
3
4
3
4
DIN
SCLK
Serial Data Input
Serial Clock Input
Serial Data Output. DOUT is the output of the shift register. DOUT can be used to daisy-
5
5
DOUT
chain multiple MAX4822/MAX4823 devices. The data at DOUT appears synchronous to
SCLK’s falling edge.
6
7
8
9
10, 16
11
12
6, 13
7
8
9
10, 16
11
12
N.C.
GND
OUT8
OUT7
PGND
OUT6
OUT5
No Connection. Not internally connected.
Ground
Open-Drain Output 8. Connect OUT8 to the low side of a relay coil. This output is pulled
to PGND when activated, but otherwise is high impedance.
Open-Drain Output 7. Connect OUT7 to the low side of a relay coil. This output is pulled
to PGND when activated, but otherwise is high impedance.
Power Ground. PGND is a return for the output sinks. Connect PGND pins together and
to GND.
Open-Drain Output 6. Connect OUT6 to the low side of a relay coil. This output is pulled
to PGND when activated, but otherwise is high impedance.
Open-Drain Output 5. Connect OUT5 to the low side of a relay coil. This output is pulled
to PGND when activated, but otherwise is high impedance.
Power-Save Control. Connect a timing capacitor from PSAVE to ground. The capacitor
value determines power-save timing as explained under the Applications Information
13
PSAVE
section. PSAVE can also be driven externally to control power-save mode
asynchronously. When asserted high, PSAVE reduces the current to all active outputs as
determined by the Power-Save Configuration Register (see Figure 1). To disable power-
save mode in all channels, drive PSAVE low for at least 3ms after the last output setting.
14
15
17
18
14
15
17
18
OUT4
OUT3
OUT2
OUT1
Open-Drain Output 4. Connect OUT4 to the low side of a relay coil. This output is pulled
to PGND when activated, but otherwise is high impedance.
Open-Drain Output 3. Connect OUT3 to the low side of a relay coil. This output is pulled
to PGND when activated, but otherwise is high impedance.
Open-Drain Output 2. Connect OUT2 to the low side of a relay coil. This output is pulled
to PGND when activated, but otherwise is high impedance.
Open-Drain Output 1. Connect OUT1 to the low side of a relay coil. This output is pulled
to PGND when activated, but otherwise is high impedance.
_______________________________________________________________________________________
7
相关PDF资料
MAX4822ETP+T IC RELAY DRIVER 8CHAN 20-TQFN
R1S8-1505/P-R CONV DC/DC 1W 15VIN 05VOUT
SP6121EB EVAL BOARD FOR SP6121
A9CCA-0408F FLEX CABLE - AFG04A/AF04/AFG04A
R1S-2409/P-R CONV DC/DC 1W 24VIN 09VOUT
SP6120EB EVAL BOARD FOR SP6120
ASPI-6045S-330M-T INDUCTOR POWER 33UH 6045 SMD
TDC475K020NSE-F CAP TANT 4.7UF 20V 10% RADIAL
相关代理商/技术参数
MAX4825ETP-T 功能描述:功率驱动器IC RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube
MAX4825EUP 功能描述:功率驱动器IC RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube
MAX4825EUP-T 功能描述:功率驱动器IC RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube
MAX4826ELT 制造商:Maxim Integrated Products 功能描述:50MA/100MA CURRENT-LIMIT SWITCHES W - Rail/Tube
MAX4826ELT+ 制造商:Maxim Integrated Products 功能描述:50MA/100MA CURRENT-LIMIT SWITCHES W - Rail/Tube
MAX4826ELT+T 功能描述:电源开关 IC - 配电 50mA/100mA Current Limit Switch RoHS:否 制造商:Exar 输出端数量:1 开启电阻(最大值):85 mOhms 开启时间(最大值):400 us 关闭时间(最大值):20 us 工作电源电压:3.2 V to 6.5 V 电源电流(最大值): 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23-5
MAX4826ELT-T 功能描述:电源开关 IC - 配电 RoHS:否 制造商:Exar 输出端数量:1 开启电阻(最大值):85 mOhms 开启时间(最大值):400 us 关闭时间(最大值):20 us 工作电源电压:3.2 V to 6.5 V 电源电流(最大值): 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOT-23-5
MAX4827ELT 制造商:Maxim Integrated Products 功能描述:50MA/100MA CURRENT-LIMIT SWITCHES W - Rail/Tube